Ladle in the production process in order to extend the service life of the refractory, Zhejiang microporous insulating material, typically high density material, but result in enhanced thermal conductivity, a lot of heat will be transmitted to the housing through the ladle lining. Many mills are generally used to reduce the lining thickness, holding time, more is to take the product post-processing, but these methods can significantly increase the temperature of the ladle shell. Ladle shell temperature will cause the ladle fatigue, structural deformation, steel and even lead to reduced density, thus increasing the ladle maintenance costs, shorten the life of ladle or a large loss caused by wear steel, cast steel process in these cases microporous insulation materials are hope to avoid. Aluminum furnace heating rod temperature reaches 1000 ℃, heating rods through the gasket and the furnace body connection, Jilin microporous insulation material, but because of the heat transfer, electronic devices connected to the furnace body aging short circuit, endangering the normal operation of the production unit , Ni Make Aluminum Co. to find us, using my company's NIP-950 Nano-shaped pieces of microporous insulation, Liaoning microporous insulation material, the success of the heat separated improve the operation cycle means lower operating costs . Steel plant molten iron from the blast furnace mouth torpedo, which was then transported to or through torpedo ladle of molten steel mill Mixer. Homogenized molten iron into the ladle from the Mixer, then enter BOF. Qualified molten steel from the converter and then tapping into the ladle, transported to the start casting the caster. Transported over long distances and wait, so that molten steel or iron cooling rate of the whole process has become an important indicator, in order to ensure the continuous casting of molten steel before the process temperature reaches a predetermined temperature, the need to determine a suitable molten steel temperature drop over according to speed heat. Selection of microporous insulation material and cooling rate of the molten steel can be minimized, thereby reducing the superheat, energy conservation, accelerate the melting cycle, improve steel production, to improve slab quality. Shanghai microporous insulation | microporous insulation | Gute Gute saving provided by the Tianjin Science and Technology Co., Ltd. energy saving. Tianjin Gute energy saving Technology Co., Ltd. (www.gutejn.com) provide customers with "refractory castable, anchoring nails, nano microporous insulation, refractory ceramic fiber, high temperature and radiation", and other services, the company has "solid-Energy" and other brands. Focusing on fire-resistant, fire prevention materials and other industries, have higher visibility in Tianjin. Welcomes inquiries, contact: Zhao Ruilin.